Two Kits to Build a Hidden Panel Secret Room and Step-by-Step Instructions
Murphy Door has been selling hardware and kits to create secret room doors for a while now. The doors look like shelves or other furniture, but are actually doors that smoothly swing open to reveal a doorway.
Their new Hidden Panel Murphy Doors can be invisible when closed and open completely, not covering the doorway at all.
See all of the Murphy Door Hidden Door Kits available on Amazon.
The new hidden panel doors are flush, flat, on both sides. When they are closed, they can be invisible, especially if you have the right molding.
The doors pull or push to swing open. The doors can be thin, very thin. The shelf murphy doors take up some of the doorway width. The new Hidden Panel Murphy Doors don’t really take up any space at all.
The Hidden Panel Murphy Doors can open completely, leaving a wide opening.
Hidden Panel Door Hardware Kits
Complete Hidden Panel Door Kits
Hidden Panel Murphy Doors can swing right or left and pull or push open.
When open, hidden panel doors take up very little doorway space.
Hidden Panel Door Hardware Kits
Complete Hidden Panel Door Kits
The door can be trimmed and finished to be completely hidden when it is closed. When the door is open, there is plenty of space to walk through the doorway.
Murphy Door Complete Hidden Panel Door Kits
There are two kits. One is less expensive that has only the hardware. You can buy the Murphy Door Hidden Panel Door Hardware Kits on Amazon.
The one that has everything is the easiest one is complete. It has everything, including wood pre-finished in black, white or unfinished to paint or stain yourself.
The Hidden Panel Murphy Door Kit comes complete with all the necessary components for installation. This includes the door panel, hinges, door handle, and mounting hardware.
You will need some tools. The instructions require a drill with Phillips head drive, 1/8″ hex wrench, adjustable wrench or 3/8″ wrench, clamps, 1/2″ countersink bit, 3/8″ countersink bit, 36″ level, mallet hammer and shims.
Door Panel, Door Jambs, Thresholds and Molding
Step-by Step instructions walk you through assembling the pre-cut pieces in your opening.
Step-by Step Hidden Panel Murphy Door Kit Instructions
Kits are available to fit most standard openings. They come in 24″, 26″, 28″, 30″, 32″, and 36″ wide. Shims and additional molding help the kit fit even less common doorway sizes.
Top: Emtek Edge Pull
Center: Removable Top Hinge Pin, Adjustable Bottom Hinge Pin, Top Removable Hinge Pin Housing, Bottom Adjustable Hinge Pin Housing, Hinge Pin Removal Tool, 1/4″-20 x 3/8″ Set Screw, Top and Bottom Hinge Bearing Plates, Top and Bottom Hinge Door Plates
Bottom: Two Magnetic Catches and Strikes, 4mm Hex Wrench
The complete door kit includes the hardware for the hinge side as well as hardware to pull the door and magnetic catches to hold it in place.
Lag Screws, Confirmat Screws, Wood Screws, Flat Head Screws, Euro Screws and Spring Pins
All of the fasteners are included, too.
Hidden Panel Door Hardware Kit
Murphy Door Hidden Panel Door Hardware Kits
The Hardware Only Murphy Door Hidden Panel Door Kit only has the hinge side parts.
Step-by Step Hidden Panel Murphy Door Hardware Only Kit Instructions
The instructions begin with a threat. This kit is for experienced carpenters. Finishing carpentry and cabinetry are skilled professions.
Murphy Door’s patent pending panel door hinge system is for experienced carpenters interested in a DIY door project. Our hinge will support a single door weighing up to 200lbs while functioning with ease. Finishing carpentry and cabinetry are skilled professions. We provide hinge templates based on the doors that we build. Additional stiffening hardware or bracing may be necessary to prevent bowing or warping of thin profile panel doors.
Murphy Door CAN NOT assist with the customization process if you choose to design/build your own hidden door.
So if you are thinking about DIYing this, don’t call them if you get into trouble changing things around. There is a template and there are step-by-step instructions to built your own door to swing in or out.
These are the pins that support the doors as it opens and closes.
This is the top
The instructions cover making the components are installed to push or pull the door open with the swing on either the right or the left.
The included template shows where to pre-drill for each hole pattern.
The components are strong enough to support a door that weighs up to 200 pounds, up to 36″ wide.
You can use the instructions and materials list for the complete kit to help you figure out what you will need to make your own kit.
